ELECTROCORDER DC-3V-TD-IP43-KIT

Three Channel Voltage Logger, Voltage Range 300V, IP43 Sealing

The Electrocorder range is designed to allow users to monitor single, two or three channels.

Setting up the Electrocorder DC-3V is easy, suitable for semi-technical staff. Using the supplied (free) Windows software, Electrosoft; the locations details are input to the unit’s memory and stored. Electrosoft will then print documentation allowing users to record and/or pass on delivery instructions to colleagues. All data is also stored in a database of dispatches and returns, which tracks the whereabouts of all units.

Why is the Electrocorder better than other similarly priced competitors The Electrocorder range use a constant sampling technique, unlike the single reading of competitors. When the loggers start to record, they sample every channel 16 times per cycle, a cycle is 16ms at 60Hz and 20ms at 50Hz. At the end of each averaging period, 3 quantities are saved for each channel, the True RMS average, the Max, which is the highest cycle value during the period and the Min, lowest cycle value. This means that it will record all the peaks and troughs which are one cycle or longer. When recording the Electrocorder will store the average voltage and current over the period chosen (1 sec to 60 min), it will also record the highest (max) & lowest (min) cycle values during that period.

Voltage Range Options:
DC-3V-SY= 60V
DC-3V-TD = 300V

Environmentall Sealing Options:
DC-3V-xx-IP43
DC-3V-xx-IP65

Electrocorder DC-3V-IP43-KIT - The product KIT is supplied with four voltage input leads, a carry case, USB lead, Electrosoft and a 12Vdc PSU. (Fused voltage input leads come with the 300V data logger.)

ELECTROCORDER DC-3V-TD-IP43-KIT datasheet & specifications