Anritsu MW82119A

Anritsu MW82119A Passive Intermodulation PIM tester

Anritsu MW82119A is the first battery-operated high power Passive Intermodulation (PIM) testing solution for the major wireless standards in use around the world. PIM is a form of interference generated by passive components that are normally thought of as linear such as connectors, cable assemblies, filters and antennas. However, when subject to high RF power levels found in cellular systems, these devices can generate spurious signals that increase the receiver noise floor and reduce site performance.

Please advise the specific option numbers you require. Note - All options cannot be installed in a single unit.

Option 0700 = LTE 700 Tx1: 734 MHz to 734.5 MHz, Tx2: 746 MHz to 768 MHz, RxLower: 698 MHz to 722 MHz, RxUpper: 779.5 MHz to 804.5 MHz

Option 0850 = Cellular 850 Tx1: 869 MHz to 871 MHz, Tx2: 881.5 MHz to 894 MHz, Rx: 824 MHz to 849 MHz

Option 0900 = E-GSM Tx1: 925 MHz to 937.5 MHz, Tx2: 951.5 MHz to 960 MHz, Rx: 880 MHz to 915 MHz

Option 0180 = DCS Tx1: 1805 MHz to 1837 MHz, Tx2: 1857.5 MHz to 1880 MHz, Rx: 1710 MHz to 1785 MHz

Option 0190 = PCS Tx1: 1930 MHz to 1932 MHz, Tx2: 1950 MHz to 1990 MHz, Rx: 1870 MHz to 1910 MHz

Option 0192 = Discontinued

Option 0193 = PCS / AWS 1900 / 2100 MHz. As of January 2014, option MW82119A-0193 is able to transmit two test tones in the PCS downlink band or transmit one test tone in the PCS downlink band and a second test tone in the AWS downlink band. Previously, two separate PIM analyzers were required to provide this multi-band test capability. The MW82119A-0193 option accomplishes this allowing customers deploying PCS and AWS networks to more accurately measure system linearity by choosing test tones that match actual site conditions.

Option 0260 = LTE 2600 MHz

Anritsu MW82119A datasheet & specifications