Leaptronix SU-3280

Stand-along Universal Gang Programmer

Leaptronix SU-3280 is high speed programming for design engineering and small production. It supports PC-based and Stand-along programming mode which through LCD and keypad download the file to the inside 3.2GB memory. Moreover, SU-3280 adopts modular design. If with the universal DIP module, you can just use general type adapter on the market for different package. Or you can select gang module for 8-16 site programming.

Features:
 Provides with DUT 75MHz bandwidth and <2.5nS signal skew.
 Provides the stand-alone mode operation. Just use 5 keys and 20x4 LCD, you can select a project and start to program.
 Provides asynchronous and concurrent operation for the 4 modules which allows chips to begin programming immediately upon insertion the chip fully on the same module. There is a message show on the LCD to inform operator to take off the finished device and inserts a new device.
 Provides IC insertion test and contact check before programming. Under the AUTO mode, just insert the IC, SU-320 will start the processes automatically.
 Provides high-expansion flexibility modular design. It can use as single-side universal programmer or SPI and FLASH gang programmer.
 Provides mass-production-oriented software. There is used a project file to control to minimize the operator error. Moreover, the log file help the production managements.

Leaptronix SU-3280 datasheet & specifications