Quadtech Sentry 10 Plus

Hipot Testers (CE Mark)

Sentry 10 Plus has been depleted and retired. The new part number is Chroma 19071. The Sentry 10 Plus AC Hipot Tester (CE Mark) performs AC dielectric withstand (hipot) tests. The test voltage is programmable from 50V to 5kV AC with a resolution of 1V. The current range is microampere to 20mA.

Features

• AC Hipot Voltage 50 to 5000V, Output Current to 20mA
• Programmable Ground Continuity Check, 0.1 to 5ohms
• Programmable Ramp, Test, and Fall Times
• Fast Cutoff and Discharge of Device Under Test
• Programmable Hi/Lo Limits for Pass/Fail Testing
• Large LCD Display for Menu Programming and Test Results
• Internal Storage and Recall of 80 Test Setups
• Ground Fault Interrupt Shutdown for Operator Safety
• Front and Rear Panel Output Connections
• Front Panel Lockout Prevents Changes to the Test Setup
• Automatic Offset to Zero Out Stray Leakage Current
• Instruments Upgradeable, Sentry 10 to 20 to 30
• 3mA Current Limit per EN50191
• UL Listed and CE Marked

  
  
  
  
  Quadtech Sentry 10 Plus datasheet & specifications