Quadtech Guardian 1030

AC/DC/IR Hipot Tester

The Guardian 1030 AC/DC/IR Hipot Tester has all the features of the Guardian 1010 with the addition of DC hipot and IR measurement capabilities. The test voltage can be programmed in the range from 50VDC to 6kVDC with a resolution of1V. The maximum total current is 10mA. The IR measurement range is from 0.1M ohm to 50G ohm with test voltages from 50 to 1000VDC. Quick Discharge: In both the DC hipot and IR tests the device under test is discharged back through the HV transformer. This technique results in a rapid and safe discharge. Ground Continuity Check: All of the Guardian 1000 Series units have a ground continuity check feature to determine that the resistance, between the ground blade of the power cord and any exposed metal on the product, is less than 1 ohm.

• Upload / Download & Logging Software Wizards
• To automate Hipot Testing via RS-232 or IEEE interfaces
• Use Visual Basic Wizard for easy setup and data collection to a PC
• Model Guardian 1030 for AC/DC Hipot and Insulation Resistance

• AC Hipot Voltage 50 to 5000VAC, Output Current to 30mA
• DC Hipot Voltage 50 to 6000VDC, Output Current to 10mA
• IR Measurements from 100kΩ to 50GΩ, Voltage: 50 to 1000VDC
• Built-In 8 Channel Scanner for Multi-Point Testing (1030S)
• Measure Real and Total Current
• Programmable Hi/Lo Limits for Pass/Fail Testing
• Ground Continuity Check with High Limit of 1 Ohm
• Ability to Perform Multiple Tests in Sequence
• Large LCD Display for Menu Programming and Test Results
• Internal Storage and Recall of 99 Test Setups
• Programmable Ramp and Test Times
• Front Panel Lockout Prevents Changes to the Test Setup
• Automatic Offset to Zero Out Residual Current
• Fast Cutoff and Quick Discharge of Device Under Test
• RS-232 and I/O Interfaces Included Standard
• IEEE-488 and Printer Interfaces Optional
• Built-In Operator Prompted Software Calibration Routine
• G1010 and G1030: UL Listed and CE Marked

Quadtech Guardian 1030 datasheet & specifications