Aaronia HyperLOG 20300 (EMI)

HyperLOG 20300 EMI (20MHz - 3GHz)

Perfect EMC/EMI pre-compliance test antenna for the pro user. Unmatched ultra high accuracy. Very high gain over the full frequency range. Latest design and technology.

The HyperLOG 20300 EMI is Aaronias latest antenna development and combines the advantages of a biconical antenna and those of a log periodic antenna in a single high end EMC/EMI antenna. Furthermore the HyperLOG EMI series offer an extremely high accuracy of 0.3 dB over the full specified frequency range and therefore can even be used as reference antenna.

By using the HyperLOG EMC antennas, the common EMI and EMC measurement error-rates, which show up by switching between different test antennas, are avoided. This is because you have only to use one antenna for the complete frequency range instead of two ore more antennas. This saves significant costs since the measuring time is reduced drastically.

The HyperLOG EMI series can also be used as a powerful broadcasting antenna with up to 310 watts. This antennas are suitable even for immunity measurements, where very high field strengths are needed by more than 10 V/m.

Every HyperLOG EMI antenna goes through rigorous testing in our laboratories before dispatch and is equipped with a high quality rubber paint which offers protection against mechanical damage and environmental influence.

Features:

- Compatible with any Spectrum Analyzer brand
- Design: Biconical & Logarithmic-Periodic (combination)
- Frequency range: 30MHz to 3GHz
- Max. input power: 310W AM
- Immunity test field strength: 10V/mm
- Nominal impedance: 50 Ohm
- Accuracy: 0,3dB
- VSWR: <2:1 (typ.)
- Gain: 8dBi (typ.)
- Antenna factor: See data sheet graph
- RF connection: N (f) or SMA (see optional adapter)
- Calibration points: 2970 (1MHz-steps)
- Dimensions (L/W/D): 1700x1200x600mm
- Weight: 4kg
- Warranty: 10 years

Aaronia HyperLOG 20300 (EMI) datasheet & specifications