Keysight-Agilent E4411B

Keysight E4411B ESA-L Spectrum Analyzer

The Keysight E4411B ESA-L Spectrum Analyzer, 1 MHz to 1.5 GHz (75-ohm) spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Agilent Technologies E4411B. The CRT displays received signal strength (y-axis) against frequency (x-axis).

Performance

• Overall amplitude accuracy: 1.1 dB
• Third order intermodulation distortion: +7.5 dBm

• Narrow resolution bandwidth, 8590 series code compatibility, or 75 ohm tracking generator
• Agilent's PowerSuite one-button power measurements included as standard

• 75-ohm input port (standard)
• 75-ohm tracking generator and battery for field use (optional)
• 5 minute warm-up to guaranteed measurement accuracy
• Rugged and portable for lab grade performance in the field
  Options at additional cost:
  
  A4H - Adds GPIB port, not compatible with option 1AX
• 049 - Color Display upgrade
• 1AX - Adds Serial & Parallel ports, not compatible with option A4H
• 1CP - Rackmount Kit with Handles
• 1CP - Rackmount Kit with Handles
• 1DN - Adds 50 Ohm Tracking Generator Output
• 1DP - 75 Ohm Input, 1 MHz - 1.5 GHz
• 1DQ - Adds 75 Ohm Tracking Generator Output
• 1DR - Adds Narrow Resolution Bandwidths
• 1DS - Adds RF Preamplifier, improves sensitivity by approximately 16 dB
• 230 - Benchlink web remote control software
• A4J - IF Sweep and Video Output ports, not compatible with option AYX
• A5D - 12 Vdc power cable
• B72 - Enhanced Memory Upgrade, increases RAM to 32 Mb for serial prefixes
• H01 - Cable TV Measurement Suite
• UE2 - Firmware Upgrade Kit

Keysight-Agilent E4411B datasheet & specifications