Spirent LAN-3300A

Ethernet Module 2-Port

SmartBits LAN-3300A and LAN-3310A are SmartMetrics Ethernet modules used to test the performance and interoperability of networking devices.With these modules, you can quickly measure all of the key metrics, including true load capacity, latency, and IP frame sequencing.

The copper-based LAN-3300A supports rates of 10, 100 and 1000 Mbps. The GBIC-based LAN-3310A supports 1000 Mbps (1 Gbps) over single and multi-mode fiber. Each module is capable of simulating the millions of clients and servers required to fully test network systems. The modules yield per-flow metrics for millions of IP flows used to assess the quality of service provided by Diffserv, MPLS, IP QoS, and VLAN enabled devices. Each module is capable of full wirerate traffic and analysis and complies with the 10Base- Tx/100Base-TX IEEE specification in 10/100 Mbps mode and the IEEE 802.3z draft specification in Gigabit mode. Use the LAN-3300A and LAN-3310A with other modules to test high-speed internetworking between 10/100/1000 Mbps Ethernet, and either 10/100/1000 Mbps Ethernet, ATM, Frame Relay, or Packet over SONET (POS) devices.

Spirent LAN-3300A datasheet & specifications