AVTECH AVR-GHV5-B

High Voltage Pulser AVR-GHV5-B

Model AVR-GHV5-B also generates a square wave, but the peak-to-peak output amplitude is variable from 0 to 800V and swings between positive and negative voltage levels of approximately equal magnitude. The pulse repetition frequency is variable from 1 Hz to 50 kHz.

For all models, the pulse timing may be set in terms of pulse width or duty cycle, as desired. The pulse repetition frequency is variable using the internal clock oscillator. A delay control and a sync output are provided for scope triggering purposes.
The units can also be triggered externally using a TTL-level pulse. A manual push button is provided for one-shot operation. Models are protected from overload conditions (such as a short-circuited load) by an automatic control feature which limits the output power for as long as the overload condition persists. All models require 100 - 240V, 50 - 60 Hz prime power.

Features:

• Amplitudes to +/- 500 Volts
• Pulse widths from 200 ns to 0.5 sec
• Rise, fall times as low as 30 ns
• PRF to 100 kHz
• Adaptable technology - easily customized
• IEEE-488.2 GPIB / RS-232 standard
• Ethernet / Telnet control optional

AVTECH AVR-GHV5-B datasheet & specifications