Berkeley Nucleonics Corporation 310H PULSE MODULE

USA Price Only - For International Pricing Contact Us to Request a Quote

The Model 310H is a 800V electrical plug in for the BNC Model 6040 Electro/Optic Pulse Generator Mainframe

Fast 800 V Pulses Into 50 Ohms

Model 310H adapts the Mainframe 6040 to amplitude requirements of up to 800V for 50 ohm loads. The operating capabilities of the 6040/310H provide outputs in the form of 1 ns resolution digital delays and gates and PRFs from .01 Hz to 100 kHz (or one shots), in both single and double pulse formats. Leading edge transitions are 10 ns or less and trailing edges as low as 10 ns. Polarity is switch selectable and pulse width can range from a minimum of 25 ns up to 20 us.

The 6040/310H combination retains the high timing accuracy, low jitter, nanosecond resolution, memory storage and programmability available with other installed 6040 modules. Also, the 310H self-protects against damage from operation at excessive duty factors or into a short circuit, with a light signaling overload conditions.

Features

• Trigger Internal 0.01 Hz to 40 KHz; external 0 to 40 KHz
• Pulse Width 20 ns to 640 s
• Delay 0 ns to 640 s (plus fixed delay)

Pulse Out

• Amplitude
  100 V to 800 V into 50 ohms. Fixed 0 V baseline. Polarity internally switch selectable.
• Resolution
  5 V (to max. amplitude).
• Linearity
  +/- 1%.
• Transition Times (10% to 90%)
  Leading edge: < 10 ns. Trailing edge: between 200 V and 750 V, 10 ns. Other amplitudes, 15 ns max.
• Max. Power
  16.2 W average, 16.2 kW peak (at 800 V).
• Max. Current
  18 A peak.
• Droop
  1%/~s max.
• Aberrations
  +/- 10% of amplitude.
• Connector
  Type N.

Timing

• Trigger
  Internal 0.01 Hz to 40 kHz at 800 V. to 50 kHz at 800 V, to 100 kHz at 600V or less; external 0 Hz to same maximums as above.
• Pulse Width
  25 ns to 20 uS (see Droop). Calibrated at 500 V; at other amplitudes true widths vary slightly in fixed value up to 10 ns max.
• Duty Factor
  0.1% max. at 800 V. Duty factors increase up to 9% at 100 V.
• Delay
  0 ns to 640 s (plus fixed delay).
• Minimum Interpulse Separation
  500 ns (trailing to leading edges).
• Module Delay
  30 ns typical (fixed) mainframe's Pulse Out to module's Pulse Out. Jitter 50 ps rms.

Berkeley Nucleonics Corporation 310H PULSE MODULE datasheet & specifications