Berkeley Nucleonics Corporation 155 OPTICAL MODULE Details

Berkeley Nucleonics Corporation 155 OPTICAL MODULE

USA Price Only - For International Pricing Contact Us to Request a Quote



1550 nm Optical Module ( 1 mW, pulse, CW) for 6040



Used in Conjunction with BNC Model 6040 Optical Pulse Generator Mainframe

The Model 155H is similar to the Model 106H except for the following:

The pulse wavelength is now 1550nm



Light Out

Spectral Peak

1064nm +/- 15nm, nominal

Spectral Width

less than 5nm, typical

Power Levels

5mW to 50mW Standard (up to 200mW custom), adjustable peak level; baseline fixed at zero.

Resolution

0.2mW.

Transition Times (10% to 90%)

1ns rise time, 5ns fall time.

Dynamic Range

10 dB.

Absolute Accuracy

+/- 1 dB (10% to full scale).

Temperature Coefficient

0.1 dB/ degrees C.

Fiber

62/125 Multi-Mode Fiber Standard (Contact Factory for custom)

Connector

FC Standard (Contact Factory for ST or SMA)





Timing

Trigger

Internal 0.01 Hz to 2 kHz; external 0 to 2 kHz.

Pulse Widths

10, 15, 20 and 25 ns. (Contact factory for custom widths between 5 nsand 50 ns.)

Delay

0 ns to 640 s (plus fixed delay) in Single Pulse. Minimum pulse separation500 uS.

Module Delay

30 ns typical (fixed) mainframe's Pulse Out to module's Pulse Out and 35 ns to Light Out. Jitter 100 ps rms.



Pulse Out

Amplitude

2 V into 50 ohms.

Transition Times

1.5 ns rise time, 2 ns fall time.



Common Module Specifications

Store

A ROM determines the instrument's allowable operating conditions andunits of display applicable for the installed module.

A nonvolatile memory (RAM) in each module stores up to ten complete settings of operating conditions (trigger level, slope, etc.) and output pulse parameters.

Recall

The RAM-stored settings can be manually or bus transferred to the mainframeto produce the pre determined outputs.

Weight

2 Ibs net (0.9 kg); 5 Ibs shipping (2.3 kg) (when installed in a Model 6040 Mainframe, est. 24 lbs. shipping)

Ambient

Same as Model 6040 mainframe