Berkeley Nucleonics Corporation 106H OPTICAL MODULE

USA Price Only - For International Pricing Contact Us to Request a Quote


1064 nm Optical Module ( 50 mW, pulse only) for 6040

Used in Conjunction with BNC Model 6040 Optical Pulse Generator Mainframe
The Model 155H is similar to the Model 106H except for the following:
The pulse wavelength is now 1550nm.

Light Out

* Spectral Peak
1064nm +/- 15nm, nominal
* Spectral Width
less than 5nm, typical
* Power Levels
5mW to 50mW Standard (up to 200mW custom), adjustable peak level; baseline fixed at zero.
* Resolution
0.2mW.
* Transition Times (10% to 90%)
1ns rise time, 5ns fall time.
* Dynamic Range
10 dB.
* Absolute Accuracy
+/- 1 dB (10% to full scale).
* Temperature Coefficient
0.1 dB/ degrees C.
* Fiber
62/125 Multi-Mode Fiber Standard (Contact Factory for custom)
* Connector
FC Standard (Contact Factory for ST or SMA)


Timing

* Trigger
Internal 0.01 Hz to 2 kHz; external 0 to 2 kHz.
* Pulse Widths
10, 15, 20 and 25 ns. (Contact factory for custom widths between 5 nsand 50 ns.)
* Delay
0 ns to 640 s (plus fixed delay) in Single Pulse. Minimum pulse separation500 uS.
* Module Delay
30 ns typical (fixed) mainframe's Pulse Out to module's Pulse Out and 35 ns to Light Out. Jitter 100 ps rms.

Pulse Out

* Amplitude
2 V into 50 ohms.
* Transition Times
1.5 ns rise time, 2 ns fall time.

Common Module Specifications

* Store
A ROM determines the instrument's allowable operating conditions andunits of display applicable for the installed module.
A nonvolatile memory (RAM) in each module stores up to ten complete settings of operating conditions (trigger level, slope, etc.) and output pulse parameters.
* Recall
The RAM-stored settings can be manually or bus transferred to the mainframeto produce the pre determined outputs.
* Weight
2 Ibs net (0.9 kg); 5 Ibs shipping (2.3 kg) (when installed in a Model 6040 Mainframe, est. 24 lbs. shipping)
* Ambient
Same as Model 6040 mainframe

Berkeley Nucleonics Corporation 106H OPTICAL MODULE datasheet & specifications