• Built-in cable and antenna analyzer (25 MHz to 4.0 GHz)

• Built-in spectrum analyzer (100 kHz to 3.0 GHz)

•  Built-in power meter (4.5 MHz to 3.0 GHz)

• Built-in GPS provides location information (latitude, longitude, altitude) as well as UTC time.

For network installation and maintenance, Cell Master MT8212B eliminates the need for field engineers and field technicians to carry, manage and learn multiple test sets. It includes transmitter analyzer (GSM, CDMA, cdmaOne, CDMA2000 1xRTT, and CDMA2000 1xEV-DO), transmission analyzer for 2-port devices, interference analyzer, channel scanner, GPS receiver, CW signal generator (tests LNAs, repeaters or base station receiver sensitivity), and T1/E1 analyzer.

MT8212B measurement capability includes precision return loss, VSWR, cable loss, distance-to-fault, signal identification, interference analysis, channel power, adjacent channel power ratio, field strength, transmitter power, code domain power (CDP), burst power, two port measurement, multiple transmitted signals, power measurement, and T1/E1 measurements including DS0/VF channel monitoring. Patented RF interference rejection enables accurate, repeatable measurements in the presence of high RF activity. PC data analysis software enables assessment of system trends, problems, and performance in addition to professional report generation.

The MT8212B includes PC data analysis software, soft carrying case, rechargeable battery, AC/DC power supply, 12 V automotive cigarette lighter adapter, RS232 null modem serial cable and users guide.

Applications

Cable and antenna testing (25 MHz to 4.0 GHz)

Spectrum analysis anytime, anywhere (100 kHz to 3.0 GHz)

Interference detection, identification and location

High accuracy power measurements for CW and modulated signals like CDMA/EVDO, GSM/Edge, and WCDMA/HSDPA

GSM RF Measurements GSM RF measurements are channel power, burst power, occupied bandwidth, carrier frequency, frequency error and Training Sequence Code (TSC).

cdmaOne and CDMA2000 1xRTT demodulator Cell Master demodulates CDMA2000 1xRTT signals displaying code domain power, pilot power, channel power, frequency error, waveform quality (rho), pilot time tolerance (tau), Pilot Ec/Io and carrier feed through.

• cdmaOne and CDMA2000 1xRTT Over The Air (OTA) over the air measurement provides a cost effective way to identify base station performance problems before they become catastrophic without taking the base station off the air.

• 1xEV-DO RF Measurements Pilot/Mac power, Pilot power, frequency error, measured bandwidth, idle/active activity and idle/active data.

• 1xEV-DO Demodulator Cell Master demodulated CDMA2000 1xEV-DO signals displaying code domain power as Mac code power or data code power screens.

• 1xEV-DO Over The Air measurement displays Pilot/Mac power, Noise Floor, Rho Overall 1, Rho Pilot, Pilot dominance, mulitpath power, three strongest pilots with power, and two strongest multipaths relative to the strongest pilot.

• Channel Scanner measures the power of multiple transmitted signals, and is very useful for measuring channel power in AMPS, iDEN, GSM, and TDMA networks.

• Transmission Measurement a two port measurement covering the 25 MHz to 3 GHz frequency range.

• T1/E1 Analyzer performing full T1/E1 functional tests, simplifying the task of determining if the source of the problem is on the wireline or the wireless side.

Features

• Handheld, battery-operated, under 5 lbs (2.28 kg), including battery
• Standard TFT Color display
• Rechargeable, snap-in field replaceable battery
• Demodulate CDMA signals (CDMAONE,CDMA2000 1xRTT, CDMA2000 1xEV-DO) using over the air (OTA) measurement while sitting in the car
• Built-in GPS receiver to save traces with location information (latitude, longitude, and altitude)
• Built-in worldwide signal standards and frequency channels
• Multilingual user interface: English, French, Chinese, Japanese, Spanish, German
• Superior immunity to RF interference
• -135 dBm typical DANL
• Intuitive and easy to use with on-screen test set-ups and single key functions
• Store/Recall 25 (Cable and Antenna analyzer - 10),(Spectrum Analyzer and transmission measurement - 5), (Power Meter - 5), and (T1/E1 Analyzer - 5) setup configurations. Save up to 200 traces

Handheld PC Software Analysis Tools Features

• Stores an unlimited number of data traces for comparison to historical performances
• Cable editor supports downloading and uploading cable list and saving as a file
• Distance-to-fault and Smith Chart analysis
• Handheld Software Tools supports all the listed options