Keysight-Agilent N4692A-00A Details

Keysight-Agilent N4692A-00A

Agilent N4692A 2-Port MW E-Cal Module, 2.92mm

The Agilent N4692A MW electronic calibration (ECal) module makes calibration of vector network analyzers fast, easy and accurate. The RF ECal system is now easily controlled by one of two methods depending on the network analyzer. The Agilent PNA and ENA series of network analyzers controls the module directly via the USB interface. The modules can also be controlled via an 85097B interface kit when used with an Agilent 8753E/ES/ET or 8720D/ES/ET. (This requires a special parallel cable and firmware Rev. 7.74).

ECal is an ideal solution for calibrating network analyzers. Performing a full two-port calibration takes less than half the time and number of connections using ECal versus mechanical cal kits. Furthermore, the accuracy of the calibration is comparable between electronic and mechanical methods. Traditional mechanical calibrations require intensive operator interaction which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest. Option 00A = Add 2.92 mm adapters.
Agilent N4692A Features

10 MHz to 40 GHz frequency range

USB interface for direct control with PNA and ENA series of network analyzers

Alternative 85097B interface when used with other analyzers

Fast calibration

Full two-port calibration with a single connection

Reduced connector wear

NIST traceable accurate calibrations

Reliable solid-state switching

Straight-forward non-insertable device calibration

User characterization available