Atten Electronics AT6011 Details

Atten Electronics AT6011

Base Frequency: 150 KHz Max Frequency: 1.1 GHz

FREQUENCY SPECIFICATIONS:
Frequency range: 0.15~1050MHz
Stability: ± 10ppm / year
Aging: ±2ppm each year
Resolution of frequency display: 10kHz(5 1/2 digit)
Readout accuracy: ± 2% sweepwidth+5 10-3 CF+10kHz
CF adjustment range: 0.15~1050MHz
Frequency synthesize: TCXO, DDS
Sweep width range: Zero steps and 1-1000MHz (1-2-5 steps)
Sweep Width accuracy: ± 10%
Resolution Bandwidth: 400kHz, 20kHz
Video-Filter Bandwidth: 4kHzSweep time: 20ms
Amplitude Specifications: 0.15~1050MHz
Range: -100dBm~+13dBm
Display: CRT, 8

10divDisplay calibration: 10dB/div, logarithmic
Display range: 80dB(10 dB/div)
Amplitude Frequency Response
10 dB Attenuation, Zero Step, Resolution Bandwidth
400kHz, Signal -17 dBm: <± 4 dB
LCD Display: 2

16, Center frequency, Sweep frequency width, Reference Level
Accuracy(Input attenuation): ?± 2dB/10dB
Reference level range: -27 dBm~+13 dBm(each 10dB)
Accuracy: (Reference level)500MHz(CF), Zero step, RBW400kHz: ± 2 dB
Average noise level: ?-90 dBm(RBW20kHz VBW4kHz)
Third order intermod.: At -27dBm two signal >3MHz apart: ?-60 dBc
2nd harmonic suppression: -27 dBm, 0 dB attenuation, ?-50 dBc
VSWR (Attenuation?10 dB): Typ. 1.5: 1

INPUT/OUTPUT:
Signal input: N connector
Impedance: 50?
Max. Continuous RF input level: 10~40 dB
Attenuation: +20 dBm (0.1W) 0 dB attenuation: +10 dBm
Max. DC input voltage: ± 25V
DC Output: DC power supply 6VDC FOR AZ530 Probe
Audio output: : 3.5mm?, speaker connector
Turning knob control: Center frequency
Tracking generator (AT6011 only)
Signal out put: N connector
Impedance: 50?
Frequency range: 0.15~1050MHz
Output level range: -50dBm to +1dBm
Frequency response: ï¿.5 2dB
Output Attenuator: 0 to 40dB (4

10dB)
Output attenuator accuracy: ï¿.5 2dB
Radio Frequency Interference(RFI): <20dBc