Keysight-Agilent 85047A Details

Keysight-Agilent 85047A

Base Frequency: 30 MHz Max Frequency: 6 GHz
S-Parameter Test Set, 50 Ohms, 300 kHz to 6 GHz

The Agilent 85047A test set provides the capability to measure transmission and reflection characteristics (including S-parameters) of two-port devices in either direction with a single connection. The test set is controlled from the analyzer and includes programmable step attenuators. It includes a frequency doubler that can be switched in to measure 3 MHz to 6 GHz in a single sweep or switched out to measure 300 kHz to 3 GHz in a single sweep. The Agilent 8753B/C network analyzers and selected 8702 lightwave component analyzer configurations control the frequency doubler. (The 8753D/E/ES and selected 8702 configurations with built-in 6 GHz source do not use the frequency doubler.) Option 006 (6 GHz receiver) is required to activate the 85047A.

• Measures reflection and transmission characteristics of two-port devices in either direction with a single connection.
• Includes a frequency doubler that can be switched in to measure 3 MHz to 6 GHz in a single sweep
• Full frequency range of 300 kHz to 6 GHz is available for 8753D/E/ES and selected 8702 configurations
• Exhibits <5 dB insertion loss between the RF input and the test ports
• 15 dBm at the test port
• Includes a programmable step attenuator

Option:
001 - Replaces mechanical transfer switch with solid-state switch for serial prefixes of 2936A and below.
009 - Replaces solid-state transfer switch with mechanical switch
908 - Rackmount kit without handles
910 - Additional Operation and Service manual
913 - Rackmount kit with handles
UK6 - Commercial cal. certificate w/ test data