Rohde & Schwarz CMW500 Details

Rohde & Schwarz CMW500

Contact us for specific option details.

The R&S CMW500 marks the entry of a new generation of test equipment from Rohde & Schwarz for fast and precise production of current and future wireless devices.

The R&S Smart Alignment high-speed test concept plus the all-in-one architecture with integrated vector signal generator and analyzer are the prerequisites for state-of-the-art non-signaling alignment approaches.

The extreme scalability, test speed, and measurement accuracy of the R&S CMW500 are the assurance for minimum test costs..

Features:

• Multi technology solution: GSM / GPRS / EDGE / WCDMA / mobile WiMAX / CDMA2000 / TD-SCDMA / LTE
• Base model: general-purpose RF power meter and CW generator with List modes for fast calibration of wireless devices
• Vector Signal Analyzer (VSA) for transmitter verification
• Vector Signal Generator (VSG) for expanded receiver testing: ARB mode for short setup times or realtime mode for complex signals with high data volume
• Reference RF power measurements with direct connection for R&S NRP power sensors
• Easy connection to wireless devices with complex RF architecture using the integrated RF interface
• State-of-the-art Graphical User Interface (GUI)
• SCPI remote control via LAN/GPIB interface
• Ready for LXI Class C
• Process controller with Windows XP operating system for test routines and remote control via Windows Remote Desktop

Popular R&D and production test solution for many smart wireless products such as mobile phones, laptops and tablets.
R&S CMW500 Option List (at additional cost):

B100A = Baseband Measurement Unit, CMW module H100A
B110A = ARB + Realtime Baseband Generator Module
B200A = Signaling Unit Universal, GSM/CDMA2000/1xEV-DO
B210A GSM/GPRS/EDGE Signaling Extension Module
B220A = CDMA2000 1xRTT signaling module
B230A = CDMA2000 1xEV-DO signaling module
B300A = Signaling Unit, Wideband (SUW)
B450A = Data application unit
B510A = Four digital IQ interface
B570B = Extra RF Converter (TRX)
B590A = Extra RF front end, basic
B612A = IEEE Bus Interface Module (single connector)
B620A = Digital video interface
B660A = Option carrier
B661A = Ethernet switch
B690A = OCXO, basic stability
KA100 = Enabling of IP-Data interface for IPV4
KA150 = Extension of IP-Data interface for IPV6
KAC10 = LTE conformance test
KAF10 = VoLTE
KB036 = Extended frequency range, 3.3GHz to 6GHz, per RF converter
KM011 =TX measurement, IQ Versus Slot (software license)
KM012 = TX measurement, Multi Evaluation List Mode / MELM
KM050 = IP based measurements
KM200 = TX Measurement, GSM/GPRS/EDGE, Uplink
KM201 = TX Measurement, EDGE Evolution Extension of KM200 Uplink
KM400 = TX Measurement, WCDMA, Uplink
KM401 = TX Measurement, WCDMA HSPA Extension of KM400, Uplink
KM403 = TX Measurement, WCDMA HSPA+ Extension of KM401, Uplink
KM500 = TX Measurement, LTE FDD Release 8
KM550 = TX Measurement, LTE TDD (TD-LTE) Release 8
KM650 = TX measurement, WLAN IEEE 802.11a/b/g
KM651 = TX measurement, WLAN IEEE 802.11n SISO
KM700 = TX measurement, WiMAX# IEEE 802.16e
KM750 = TX measurement, TD-SCDMA uplink
KM800 = TX measurement CDMA2000 1xRTT reverse link
KM880 = TX measurement CDMA2000 1xEV-DO Revision 0/A/B reverse link
KS200 = Signaling (network emulation), GSM/GPRS/EDGE
KS201 = Signaling (network emulation), GSM Release 7 EDGE Evolution
KS203 = Signaling (network emulation), GSM Release 9 VAMOS
KS210 = Signaling (network emulation), GSM GPRS EDGE Release 6,
KS400 = Signaling (network emulation), WCDMA Release 99
KS401 = Signaling (network emulation), WCDMA Release 5/6 HSPA
KS403 = Signaling (network emulation), WCDMA Release 7 HSPA+, SISO
KS404 = Signaling (network emulation), WCDMA Release 8
KS410 = Signaling (network emulation), WCDMA Release 99
KS411 = Signaling (network emulation), WCDMA Release 5/6 HSPA
KS500 = Signaling (network emulation), LTE FDD Release 8, SISO
KS510 = Signaling (network emulation), LTE Release 8, SISO
KS520 = Signaling (network emulation), LTE MIMO2x2
KS550 = Signaling (network emulation), LTE TDD (TD-LTE) Release 8
KS800 = Signaling (network emulation)basic CDMA2000 1xRTT
KS810 = Signaling (network emulation)advanced CDMA2000 1xRTT
KS880 = Signaling (network emulation)basic CDMA2000 1xEV-DO Revision 0/A
KS881 = Signaling (network emulation)basic CDMA2000 1xEV-DO Revision B
KS890 = Signaling (network emulation)advanced CDMA2000 1xEV-DO Revision 0/A
KT053 = GSM/WCDMA, CMWrun sequencer software tool
KT055 = LTE, CMWrun sequencer software tool
KT058 = CDMA2k 1xRTT/EV-DO sequence
KV110x2 = Waveforms for ARB generator, library 1
KV112x2 = Waveforms for ARB generator, library 2
PS502 = Wideband Radio Communication Tester, Basic Assembly
PS502x1 = CMW500 basic assembly (mainframe), including : one RF converter
S550B = Baseband interconnection
S550Bx1 = Baseband Interconnection, flexible link,for non-signaling, signaling
S590A = RF Frontend, basic functn
S590Ax1 = RF Frontend, basic functionality
S590D = RF Frontend Module advanced
S600B = Front Panel with Display/Keypad
S600Bx1 CMW500 frontpanel with display/keypad CMW module H600B

Please Note:
*** KS500 requires B110A
*** KS501 requires KS500
*** Option B590A cannot be installed with S590D

As 4G and LTE applications expand, additional options may be released. Ask your Test Equipment Connection salesperson for details.