Anritsu MS610B

Anritsu MS610B 10kHz to 2GHz, 50ohm Portable Spectrum Analyzer

The Anritsu MS610B spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Anritsu MS610B. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Some applications for Anritsu MS610B Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Anritsu MS610B spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Anritsu MS610B spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.

Dynamic Range +20 dBM - -115 dBm
Frequency Range 10 kHz - 2 GHz
Input Impedance 50 ohms
Resolution Bandwidth 1 kHz - 1 MHz
Video Bandwidth 100 Hz - 10 kHz