Hioki 8936

HIOKI 8936 ANALOG UNIT Voltage input amplifier

This UNIT is equipped with circuits for two independently usable input
channels. Simply slot the 8936 into the MEMORY HiCORDER for use.

SPECIFICATIONS:

• Input Number of channels: 2,
  Connector:Insulated BNC * Input isolated from output, inter-channel
  isolation
• Measurement ranges 5 mV to 20
  V/division, 12 ranges, the measurement resolution is 1/80 of range
• AC voltage for possible
  measurement/display using the memory function:280 V rms * When attached to
  recorder where full-scale (f.s.) = 20 divisions
• 10 mV to 50 V/division, 12
  ranges, the measurement resolution is 1/160 of range
• AC voltage for possible
  measurement/display using the memory function:280 V rms * When attached to
  recorder where full-scale (f.s.) = 10 divisions
• Low-pass filter:5/500/5 k/100
  kHz
• Maximum sampling rate 1 MS/s
  (simultaneous sampling of two channels)
• Accuracy DC amplitude: 0.4
  %f.s. Zero-position: 0.1 %f.s.
• Zero-position -50 % to 150 %,
  1 % step * With zero-adjustment function
• Frequency characteristics DC
  to 400 kHz 3 dB with AC coupling: 7 Hz to 400 kHz 3 dB
• Max. allowable input 400 V DC
  (upper voltage which when applied to between input pins does not damage
  them)
• Max. rated voltage to earth
  370 V AC, DC (upper voltage which when applied to input channel casing or
  between input channels does not damage them)
• Accessories None * The input
  cord is optional