Hioki 3930

Hioki 3930 HIGH VOLTAGE SCANNER

Description

Automatic Multipoint Testing of High Voltages

* Maximum of 32 Channels In single mode, an individual 3930 can measure eight channels, and up to four units can be connected together for a total of 32 channels.In multi-mode, the 3930 has four high and low channels, respectively;and when four units are connected, up to 16 high and low channels can be tested.
* Safe Design The 3930 can handle up to 5kV of direct current or alternating current. The 3930 is a general-purpose high voltage scanner that can not only be controlled by using the HIOKI 3153's program function, but also by general-purpose logic and sequencers.
* Primary Applications Insulation withstand voltage testing for electrical and electronic equipment Insulation withstand voltage testing for electric components

General specifications

* Degree of Accuracy Standards for current leakage when applying voltage
* Single mode, no output cable, and all output relays
* Turned on for both AC and DC.
* When applying DC (1000 V); 0.1 MicroA or less/unit
* When applying AC (5 kV, 50/60 Hz only); 0.4 mA or less/unit (Differs depending on the status of the connection cable)
* Operation temperature range 0 C to 40 C, 80% rh or less (no condensation)
* Storage temperature range -10 C to 50 C, 90% rh or less (no condensation)
* Operation environment Indoors, altitude of 2000 m or less
* Withstand voltage High voltage terminal - between the chassis:
* AC 10 kV, 10 mA, 1 min
* Power VSCV 24 V DC, 10% (applied using the control signal input connector)
* Maximum rated power 12 VA
* Measurements Approx. 316 (W) × 100 (H) × 350 (D) mm
* Mass Approx. 4.2 kg
* Standard accessories Connection cables H.V. TEST LEAD 9615

Hioki 3930 datasheet & specifications