PIE 530 Loop Calibrator

PIECAL 4-20mA Loop Calibrator

Discontinued- Pie 434 is manufacturer recommended replacement.

SIMPLE TO USE BUT FEATURE LOADED!

Process Calibration just became easier with Practical Instrument Electronics (PIE) Model 530 Loop Calibrator. It is simple and easy to use, yet packed with features. The EZ-Dial™ knob and EZ-Check™ switch are all that's needed to make simple adjustments or set 0% or 100% of full-scale. Now calibration is easy as PIE.

• Accuracy to 0.012% of reading
• Read and Source 0.000 to 24.000mA
• Display milliamperes or -25.00 to 125.00% of 4-20mA
• Bar graph displays % of 4-20mA
• Read 0.00 to 60.00 volts with over range indication to ± 100 volts
• Drive 1200 Ω
• User selectable 250Ω resistor in series with the output for compatibility with HART® protocol enabled devices
• EZ-Dial™ knob easily adjust output by 0.01mA (0.01%) or 0.10mA (1.00%).
• EZ-Check™ switch
• User settable EZ-Check™ for 0% and 100% span adjustments.
• Fuseless protection from accidental connection to 240 volts AC/DC
• Adjustable auto-ramping/auto-stepping functions
• Power measure and simulate 2-wire transmitter
• Uses 1 – 9Volt alkaline battery
• Superior battery life of 40 hours under typical continuous usage
• Easy access to battery compartment
• Rugged handheld enclosure with optional lanyard and Velcro® hand strap

PIE 530 Loop Calibrator datasheet & specifications