Rohde & Schwarz SMJ100A-B11-B13-B103

Vector Signal Generator

The R&S SMJ100A meets all challenges that diverse applications place on modern vector signal generators. For example, it offers the signal quality and flexibility required in research and development - not to mention a convenient graphical user interface (GUI). And this is by no means all the R&S SMJ100A has to offer - a fact that becomes evident in production, where it excels with its flexible baseband and low setting times. The baseband meets all requirements, from providing realtime signals to replaying precalculated waveforms.

Equipped with 3 GHz or 6 GHz frequency options, the R&S SMJ100A covers all important frequency bands essential in digital RF transmission. The internal baseband generator option handles a multitude of digital standards, e.g. GSM/EDGE, 3GPP FDD and CDMA2000 1). Its characteristics make the R&S SMJ100A the ideal all-purpose vector signal generator, supporting a wide variety of applications.

To handle future standards, the R&S SMJ100A features a large bandwidth; thus, new standards such as WiMAX pose no problem. The internal arbitrary waveform generator is proof of its versatility. It offers sequences up to 128 Msamples in length and can be used with diverse signals from R&S WinIQSIM or Matlab.

High signal quality

• IQ modulator with 200 MHz RF bandwidth
• Very low SSB phase noise of typ. - 133 dBc (f = 1 GHz, 20 kHz carrier offset, 1 Hz measurement bandwidth)
• Wideband noise of typ. -153 dBc (CW, f = 1 GHz, >10 MHz carrier offset, 1 Hz measurement bandwidth)
• Excellent ACLR performance of typ. +69 dB for 3GPP FDD (test model 1, 64 DPCHs)
• High-stability reference oscillator as standard
• High level repeatability

• Very short frequency and level setting times (<2 ms); only 450 s in List mode
• Electronic attenuator up to 6 GHz over the full level range
• Flexible high speed measurements with RF List mode and multisegment waveforms

• Support of EUTRA/LTE signal generation
• Support of WiMAX IEEE 802.16-2004/Corr1-2005, 802.16e-2005, and WiBro
• Four code channels in realtime for 3GPP FDD, support of HSDPA and HSUPA
• Support of WLAN 802.11 a, b, g and n
• Change of modulation from slot to slot for GSM/EDGE
• Baseband generator with universal coder for realtime signal generation
• Arbitrary waveform generator with 16 Msample, 64 Msample or 128 Msample
• Arbitrary waveform generator supported by R&S WinIQSIM2™ and R&S WinIQSIM simulation software

• B11 - Baseband Generator with ARB (16 Msample) and Digital Modulation (realtime)
• B13 Internal baseband I/Q
• B103 100 kHz to 3 GHz
  
  
  
  
  Rohde & Schwarz SMJ100A-B11-B13-B103 datasheet & specifications