|
LX-110/120 Unit Specification |
Sampling Frequencies
(LX-110/LX-120) |
96 / 48/ 24/ 12 / 6 /3 / 1.5 kHz (Common to each Channel)
| Low speed sampling |
Cutoff Frequency |
Attenuation |
| 1kHz |
400Hz |
-80dB( at 500Hz ) |
| 500Hz |
200Hz |
-80dB( at 250Hz ) |
| 200Hz |
80Hz |
-80dB( at 100Hz ) |
| 100Hz |
40Hz |
-80dB( at 50Hz ) |
| 50Hz |
20Hz |
-80dB( at 25Hz ) |
| 20Hz |
8Hz |
-80dB( at 10Hz ) |
| 10/5/2/1Hz |
4Hz |
-80dB( at 5Hz ) |
| 2/5/10/30/60s(cycle) |
4Hz |
-80dB( at 5Hz ) |
| (Aliasing will occur at and under 5Hz sampling) |
|
Sampling Frequenies
LX-120 |
102.4 / 51.2 / 25.6 / 12.8 / 5.12 / 2.56 / 1.28 kHz |
| 65.536 / 32.768 / 16.384/ 8.192 /4.096 / 2.048 / 1.024 KHz |
100 / 50 / 20/ 10 / 5 / 2 / 1 kHz (Common to each Channel ) |
Tachometer Pulse Input
LX-120 |
(Cannot be used simultaneously with generator output) |
| Num. of Input Channels |
2 x 16 bit Channels?2 x 32 bit Channels(Highest sampling frequency settings support the moving average only at one(1)) |
| Use the lowest 1bit for techometer pulse timing bit. |
| Input Format |
Threshold level selections +0.5/1/2.5/10/20 V (Max allowable input voltage is 50 V) |
| Input Connector |
BNC |
| Frequency Division Ratio Setting |
1 to 255 |
| Moving Average Measurement |
1 to 16 |
| Measurement Mode |
Pulse count mode(Count of number of pulses within the gate time; Conunt of the total number from start to stop),Cycle count mode,Frequncy measurement mode,RPM mode |
Generator Output
LX-120 |
(Cannot be used simultaneously with tachometer pulse input) |
| Num. of Output Channels |
1ch (Monitor output and a combined use) |
| Output signal |
Sine wave,Sweep Sine wave,Pulse,Pink noise,White noise |
| Input Channel change |
1/ 2 / 4 / 8 / 16 / 24 / 32 ch |
Recording Devices |
Choice of Memory only,Memory+PC card drive* |
| Memory |
From the standard 64MB to a maximum of 576 MB |
| PC card |
Flash memory , supports up to 8GB capacity (FAT16 or FAT32) |
| *Please refer to homepage reference or business for the recommended PC Card. |
| Inteface |
Choice of 10BASE-T/100BASE-TX or Firewire( IEEE1394) (Specify one when you order) |
| Front Panel Control Keys |
REC FWD,REC FWD,STOP,PAUSE,EVENT,P.LOCK |
| Monitor Channel |
1(analog output),BNC |
| Monitor output level |
+/-1 to 5 V (0.1 V step) |
| Microphone Jack |
1 |
Speaker and Earphone Jack |
1 each |
MAX. Recording Rate |
Memory Approx.1.6 MB/s,PC card Approx.0.8 MB/s |
PC Throughput |
Firewire(IEEE1394) Approx. 1.6 MB/s,Ethernet Approx.0.8 MB/s |
Time Precision |
+/-1ppm ( 25 deg C ) |
Temperature and Humidty |
5 to 35 deg C Humidity 20 to 85%RH (Operation)(non-condensing) |
Internal Clock Correction |
+/- 30-seconds adjustment |
Power Supply |
11 to 30 V DC |
Safety Standards |
CE,VCCI |
Vibration |
Conforms to MIL-STD-810 Figure 514.4-1,2,3 for the models with memory only memory + PC card drive |
| Power Consumption |
*These specifications are different by the number of the amplifier / channels to choose.Please refer to amplifier specifications page. |
Usable OS of Standard software [LX-Navi] |
Windows XP/ Windows 2000 |
| External Dimension (WxHxD) (Excluding protruding Parts) |
Approx 300 x 65 x 200 mm |
| Approx 11 13/16" x 2 9/16" x 7 7/8" |
| Weight |
*These specifications are different by the number of the amplifier / channels to choose.Please refer to amplifier specifications page. |
| Standard accessories |
| DC Power Cable/AC Adaptor/Standard software[LX-Navi] /Instruction Manual |
|
