Text For Info, USA Phones only
<- BACK


Refurbished Quadtech Guardian 6000 Plus


Quadtech Guardian 6000 Plus

Request Information
Refurbished
The Guardian 6000 Plus Electrical Safety Analyzer performs AC and DC hipot (hy-pot), insulation resistance, ground bond (continuity) measurements for a complete dielectric testing solution. A fully automated tester, the G6000 Plus performs both high voltage electrical safety tests including dielectric withstand and dielectric breakdown and high current ground bond tests in accordance with the requirements of UL 60950 and other product safety compliance standards.
  • A complete electrical safety testing solution in a single instrument
  • Simultaneous hipot and ground bond testing
  • Fully automated tester for integration into a production environment
  • High voltage/high current scanner options for multi-point testing
  • Archive test setups, data and results with CaptivATE Automation Software
Features
  • AC Hipot: Programmable Voltage 50 to 5000VAC, Leakage Current to 40mA
  • DC Hipot: Programmable Voltage 50 to 6000VDC, Leakage Current to 12mA
  • Insulation Resistance: 100kΩ to 50GΩ, Test Voltage 50 to 1000VDC
  • Ground Bond: Programmable Current to 30A, R Measurement to 510mΩ
  • Twin Port Simultaneous Hipot and Ground Bond Testing
  • Open/Short Circuit Detection Mode
  • Programmable Hi/Lo Limits for Pass/Fail Testing
  • Ability to Perform Multiple Tests in Sequence
  • Internal Storage and Recall of 100 Test Setups, 50 Steps Each
  • Programmable Ramp, Dwell and Test Times
  • Front Panel Lockout Prevents Changes to the Test Setup
  • Automatic Offset to Zero Out Residual Current
  • Fast Cutoff and Quick Discharge of Device Under Test
  • RS-232 and I/O Interfaces Included Standard
  • IEEE-488 and Printer Interfaces Optional
  • Pause Mode Allows the Operator to Change Device Connection and Continue
  • Built-In Operator Prompted Software Calibration Routine
  • Front and Rear Panel Output Connections
  • 40 Ground Bond Testing with Optional Transformer
  • Multi-Point Testing with Optional Internal Scanner and/or External Scanners
  • CaptivATE Automation Software for G6000 Plus; Optional
  • CE, TUV Marked

    • Options & Accessories:
    G39 = IEEE-488 Interface [G1000/G6x00P] - A190508
    G43 = Rack Mount Kit [H2000/GkV/G6x00P] - A190343
    G45 = 40A Ground Bond Option [G6x00 Plus] - A190334
    G48 = 60A Ground Bond Option [G6x00 Plus] - A190337
    G32 = Isolation Transformer (1000VA) [G6100P] - A190314
    G50 = Isolation Transformer (2000VA) [G6100P]
    G25 = Corded Product Adapter (240V) [G6x00P]
    G30 = Corded Product Adapter Leakage (115V) [6000-7]
    G50-01 = Cable [6000-07]
    5000-03 = Scanner, 8 Ch HV, rack mt [G Specialty/G6x00P] - A190301
    5000-04 = Scanner, 8 Ch HV/4GC, rack mt [G6x00P] - A190305
    6000-01 = Scanner, 8 Ch, 5 HV/3GC [G6000P] - A190302
    6000-02 = Scanner, 8 Ch, 3 HV/5GC [G6000P] - A190303
    6000-03 = Scanner, 8 Ch, 8 HV [G6000P] - A190304
    6000-07 = 20A Leakage Current Scan Unit [G6100P] - A190308

    S02 = HV Lead Set, high & low, 1m - W38 001940/W38 001760
    S02-02 = HV Lead Set, 12ft
    S02-07 = HV Lead Set, 10 ft, unterminated, qty 8
    S02-08 = HV Lead Set, 8 meters
    S04 = HV Lead Set, high & low, 2m - W38 001950/W38 001920
    G13 = Corded Product Adapter (115V)
    S05 = Foot Switch
    S06 = High Voltage Probe
    S08 = Gun Probe
    S08-05 = Gun Probe, 4 meters
    S09 = HV Lead, 1 meter, unterminated - W38 000676
    S10 = HV Lead, 2 meters, unterminated - W38 000680
    S11 = Gun Probe with remote start
    S12 = Load Box, resistive (200K-500K)
    S14 = Load Box, custom resistors
    S14-01 = Load Box, Pass/Fail
    S14-03 = Load Box, Power Entry Adapter, Pass/Fail
    S14-05 = Load Box, Calibration (45k-1G)
    G14 = Power Entry Adapt Cable(std w/G6000P) - W38 000870
    G15 = GB Lead Set, high & low [6000P/G1050/S50P] - W38 001830
    G15-03 = GB Lead Set, 8 Meter [6000P/G1050/S50P]
    G15-04 = GB Lead Set, 3 Meter [6000P/G1050/S50P]
    G16 = International Power Strip
    G33 = Power Entry Adapt Cable [std w/G6000P]
    G40 = Scanner Clip Lead Set (8)
    630250 = USB to RS-232 Serial Adapter for Guadian series
    CaptivATE Kit = "CaptivATE Required Kit for CaptivATE 3.3 and 3.6 Includes: CaptivATE manual, RS-232 Cable, USB – RS-232 Cable and Barcode scanner."
    CaptivATE 3.6 = CaptivATE 3.60 Automation Software
    CaptivATE 3.6M = CaptivATE 3.60 Automation Software Medical

Quadtech Guardian 6000 Plus datasheet & specifications

REQUEST QUOTE
 
What product are you interested in?
 *
Your Name
*
Your Company
*
Email
*
Verify Email
*
Telephone
Fax
Country
*
State
Address
City
Zipcode
Referral
Additional Comments