Refurbished Fluke 1622A-S KIT
Request Information
Refurbished
| DewK USB Wireless, Standard Two years ago the 1620 DewK revolutionized environmental monitoring for calibration labs, but it just got better. With the 1620A, you can easily monitor and record conditions throughout your entire facility with the DewK’s new Ethernet and wireless connections, and set your upgraded LogWare III software to notify you immediately of changing conditions. You’ll still have the superior convenience, dependability, and NIST-traceable accuracy of a 1620, but your 1620A will give you the added accessibility and peace of mind you’ve been looking for. The Hart Scientific 1622A-S kit contains: 1620A DewK Thermo-Hygrometer Two standard-accuracy sensors Wall mount bracket RS-232 cable 25 ft sensor extension cable Sensor wall mount bracket Sensor case 9936A LogWare III single-PC license 2633-RF 2633-USB Features Superior accuracy Network enabled Powerful logging and analysis tools Two interchangeable calibrated sensors Huge memory Upgraded software Accuracy Two types of sensors are available from Hart, and the DewK may be originally purchased with either one. The high-accuracy sensor (“H” model) reads temperature to +/- 0.125 degrees C over ?a calibrated range of 16 degrees C to 24 degrees C. ?Relative humidity readings are to +/- 1.5 %RH from 20 %RH to 70 %RH. The standard-accuracy sensor (“S” model) reads temperature to +/- 0.25 degrees C over its calibrated range of 15 degrees C to 35 degrees C. Relative humidity readings are to +/- 2 %RH from 20 %RH to 70 %RH. All DewK sensors come with NVLAP accredited certificates of calibration for both temperature and humidity, complete with data and NIST traceability. Hart provides exceptional uncertainties, including total test uncertainty ratios better than 3:1 for both temperature and relative humidity—even for the high-accuracy sensors! Both sensors can also measure temperature below their respective calibrated ranges to 0 degrees C and above their respective calibrated ranges to 50 degrees C with typical accuracy of +/- 0.5 degrees C. And RH readings from 0 %RH to 20 %RH and from 70 %RH to 100 %RH are typically within +/- 3 %. |
Fluke 1622A-S KIT datasheet & specifications
