New Electrom Instruments 30PP
Request Information
New
30kV Power Pack: The Power Pack is used to test large and high voltage rotating machines such as slow speed 4,160V, to 13,800V electric motors All tests available with the iTIG are standard in all Power Packs when used together with an iTIG. Power Packs may be used for Stand Alone DC Hi-Pot and Megohm Testing. The surge test is a load dependant test. Load characteristics are influenced by operating voltage, horse power, rotating speed, frame size, coil type etc. Greater loads may necessitate a Power Pack. Assembled motors may limit output voltage because of the magnetic influence of the rotor thus requiring a Power Pack. The iTIG captures and displays the surge waveforms from the Power Pack. The Power Pack is portable and has the same rugged case as the iTIG. Simple interface with the iTIG, for ease of use! Standard 30KV Power Pack (iTIG) Specifications: Surge Test Maximum Voltage 30 kV Maximum Current 2,000 Amps Maximum Energy 18 Joules DC Hi-Pot / Megohm Tests Maximum Voltage 30 kV Maximum Current 5 mA Over-Current Trip 5mA Micro-Amp Display 1 micro Amp resolution Meg Ohm Display 1 Meg Ohm to infinite Input Voltage: 120 VAC or 220-240 VAC, 50 or 60Hz Weight: 70 lbs - 32kg Dimensions: 20¼ x 8.5 x 19.5 inches - 51 x 22 x 50 cm |
![](https://www.testequipmentconnection.com/images/adobeicon.png)
Electrom Instruments 30PP datasheet & specifications