New Time Electronics 5011
Request Information
New
| Time Electronics 5011 Resistance and Temperature Calibrator w/ Factory Certificate 1 Ohm - 120 MOhms RTD Simulation Thermocouple Simulation DCV and DCI Options 10MHz Frequency Option RS232/GPIB/USB Front Panel Operation EasyCal Software Compatible Description: The 5011 is primarily a programmable resistance / RTD source. With the ability to add DC Voltage, Thermocouple Simulation and DC Current the 5011 is truly a versatile temperature calibrator. High performance resistance of is offered as standard with an accuracy of 0.01% and 1mO resolution from 50O to 1kO. Simple front panel operation allows the user to quickly set the function and output required. Using the jog / shuttle dial deviation the user can finely adjust the output value as a percentage (+/- 9.99%). All this information is shown on a clear, easy to read LED display. As standard the 5011 uses a SCPI command structure for programming. The 5011 also supports the older 9811/19/20 command set making it an ideal replacement for these models. The DCV / Thermocouple option provides a DC voltage source (+/- 20V) and simulates thermocouple types K, J, T, R, S, N, E and B. A DC Current option is available which sources up to 220mA. This makes the 5011 ideal for accurate process control calibration. A 0.1 Hz to 10 MHz frequency (Period 100nS to 10s) option is also available. The output is variable with a best resolution setting of 0.1Hz. Calibration Made Easy Connect the 5011 to a PC/Laptop (via RS232, GPIB or USB) installed with Time Electronics EasyCal and automate the calibration process. Increase speed of calibration and consistency of results; produce calibration certificates and reports to ISO 9001 quality standards. See Data Sheet for Available Options NIST/UKAS Calibration Certificates can be provided at an additional charge. |
Time Electronics 5011 datasheet & specifications
