Refurbished Ameritec AM5XT-200
Request Information
Refurbished
| The Ameritec Model AM5XT-200 is a compact, user-friendly, yet powerful wideband analog transmission test set. It is powered by internal rechargeable batteries or by 110/220 VAC. The user utilizes the color-coded controls and menu selection to select the desired measure mode and send mode. Measurements are captured and are automatically displayed. An X-Y matrix of buttons along the left side and bottom of the unit are used to select the test to be performed. The Ameritec Model AM5XT-200 can do a variety of measurements. With its built-in dial capability on dial-up networks it can access a distant responder or a second AM5XT-200 for centralized 2-wire testing. You can use a single unit with an Ameritec responder for centralized loop back testing. Or, use two sets for a complete end-to-end test of 4-wire data lines. What Can It Test? Able to measure transmission circuits over the wideband range of 50 Hz to 200 kHz as follows: * dBm level or dB loss * Frequency * Frequency Response (Attenuation Distortion) * Noise * Noise with Tone * Signal/Noise Ratio * P/AR * 3 Level Impulse Noise * Phase and Gain Jitter * Hits and Dropouts * Envelope Delay * Intermodulation Distortion In addition, it is equipped with a user-programmable, non-volatile memory contained within the unit. The unit can store up to 20 operator-defined send/measure test configurations. |
Ameritec AM5XT-200 datasheet & specifications
