8-Channel Digital Delay Generator (250 ps resolution) Standard Communication includes RS-232, USB Standard

The Model 575 provides multi-channel 250 ps-resolution timing, delaying, gating, pulsing and syncing functions for an attractive price. There are many practical modes of operation and features in addition to the traditional digital delay and pulse generator modes. For usefulness and value – there is nothing comparable.

Each channel provides both delays and widths – so a 2-channel Model 575 provides the same delay and width functionality of competitive 4-channel units. The 575 is available in 2, 4 and 8 channel configurations, with optional Ethernet, USB, High Voltage and Dual Input Trigger options.

Features

• 250pS Delay & Width Resolution on 8 channels
• 50pS channel Jitter / 800pS RMS Ext. jitter
• Independent clock rates for each channel
• Clock In & Clock Out
• Programmable (Ethernet/USB/RS-232/GPIB)
• Combine Electrical and Optical Outputs
• Dual Inputs (2 Gate / Gate+Trig / 2 Trig)

Applications

• Trigger, Gate, Delay, Pulse or Sync experiments or lasers
• Sync to an External Clock, Pulse Pick (up to 100 MHz)
• Master/Slave or Multiple Unit Slave; Complex Burst Functions
• Control Front-End, Q-Switch, Flashlamp, PIV, Laser/Pump Laser Timing

This Digital Delay/Pulse Generator, representing our finest in precision timing, provides precise delays and widths with 250pS resolution for times up to 100 seconds. Low jitter both with internal clocks (50pS) and using an external trigger (800pS) give users the timing needed to control many devices. This is particularly useful where several pulses or gate signals need to be delayed and timed with respect to each other or the common trigger. You may even use one channel as a trigger reference for other channels, locking the timing delays when needed. There is lots to learn about the Model 575, which offers much more than a clock-divider, independant channel triggering, indendant amplitudes/channel, delay and width control, and a Labview 8 driver. Give us a call, we are happy to discuss your applications.

New Features in the Model 575:

Illuminated Channel Enable Buttons

Each channel has a designated enable/disable button. When individual channels are active or enabled the buttons are illuminated. This allows for easy reference and avoids any confusion of output operability. The run/stop indicator on the front panel LCD display as well as an illuminated run/stop button further simplify setup.

Selectable Clock Reference

The Model 575 offers additional inputs and outputs for external clock syncing. Specify your input / output reference frequency (10MHz to 100MHz). Sync with the Mode Lock Oscillator of a laser, or phase lock multiple units with one clock.

Flexible Gating Options

The Model 575 is packed with gating options for almost any setup. You may gate with a channel or on any input. You may gate individual channels or gate all. Gate immediately (output inhibit) or gate after a pulse (pulse inhibit).

External Trigger Options

Select channels for internal / external triggering, or free-run. Triggered channels have flexible output choices: single pulse, burst at its clock rate, continuous pulse train or a series of on/off pulses (duty cycle). Contact us for custom wave trains or modes.

Individual Rates

Each channel can have individual channel rates (either To or Tx... where Tx is the alternate channel rate for that specific channel... e.g. T1 for Channel 1).

Auto-Save

Forgot to save your settings? The Model 575 stores your setup configurations while powering down. Recall is automatic on power-up.

Dual Input Panel Connectors

The Model 575 offers two inputs for triggering or gating. User may specify electrical or optical input signals, and configure any trigger/gate combination. Use Trigger #2 to disable a triggered pulse train.

Front Panel High Voltage

Our modular architecture allows us to offer expanded functionality on user-selected front panel outputs. We offer a front panel High Voltage option ( adjustable to 35V, 200 mV steps) on 2, 4, 6 or all 8 channels.

Front Panel Optical

Many applications benefit from optical signals. For noisy environments, or communications applications, we offer an LED output stage at the front panel. This modular option can be configured for 2, 4, 6 or 8 outputs at 820nm or 1310nm.

Combined Output Types

The outputs are configured in modules and output types are combined in pairs. Thus one may select optical, standard electrical or high voltage electrical in pairs for their instrument. For example, a 8 channel unit may have optical, standard electrical and high voltage outputs all on one instrument. Custom or additional output modules will be added as the need arises. See our handy Order Chart for all option configurations.

Field Programmability

The instrument can now have functions upgraded in the field, such as a special or custom feature upgrade via a fully programmable FPGA.

Field Programmability

Customer Output Modes

Custom Modules such as the TZ-50 give users an expand list of capabilities with the Model 575. One example is our TZ-50 option, which allows customers a TTL signal into 50 ohms, by compromising the waveform properties.

Negative Delay

Use the handy negative delay feature to reference one channel with respect to another channel in positive or negative time increments. By allowing a channel to reference another channel as it’s trigger, you can synchronize the channels with respect to each other.