Text For Info, USA Phones only
<- BACK


Refurbished Agilent DSO81204A


Agilent DSO81204A

Request Information
Refurbished


This oscilloscope is required to meet the performance needs of engineers designing state of the art high speed serial communication links and other ultra high speed electronic systems.


Modern industry bus standards such as Fibre Channel, Fully Buffered DIMM, Serial ATA, Serial Attached SCSI, and PCI-Express have performance points in the 4 to 8.5Gb/s range.


Proprietary high speed serial buses can also have clock rates in the 4 to 8.5Gb/s range as well as edge speeds with rise times faster than 50ps. 


These Oscilloscopes are required to capture the frequency harmonics of such high speed signals and make accurate and repeatable measurements on them.



Specifications



  • Frequency range/ bandwidth: 12GHz



  • Max. Vertical sensitivity: 1V/div



  • Min. Vertical sensitivity: 1mV/div



  • Number of channels: 4Ch



  • Record length: 1Mpts - 128Mpts



  • Sample rate: 20GSa/s per channel - 40GSa/s on two chan



  • Type (D/A): Digital


    •  


    Key Points


     




  • 12GHz bandwidth real-time oscilloscope with up to 40 GSa/s sample rate



  • InfiniiMax II 1169A probing system with 12GHz bandwidth



  • Trigger jitter less than 500 fs RMS



  • Electronic attenuators eliminate the reliability and ESD discharge concerns associated with mechanical attenuator relays



  • Lowest vertical noise floor and lowest jitter measurement floor in the industry



  • Unrivaled InfiniiMax probing accessories support browsing, solder in, socket use, and SMA use models



    • OPTIONS
    • 001 2-M (2 channels), 1-M (4 channels) memory upgrade
    • 64 M (2 channels at 4 GSa/s) or 32 M (4 channels = 2 GSa/s)
    • 002 EZJIT jitter analysis software (installed at the factory)
    • 003 High-speed serial data analysis/mask testing with clock recovery and 8b/10b decoding (installed at the factory)
    • 004 EZJIT Plus jitter analysis software (installed at the factory)
    • 005 Noise reduction and bandwidth control option (installed at the factory). Included standard for DSO81304B.
    • 017 = 40 Gb removable hard disk drive. Replaces internal hard disk with a removable
    • hard disk. Order the N5422A for additional hard disk drive cartridges.
    • 018 STANDARD HARD DRIVE
    • 092 Standard
    • 093 10MHz Timebase Reference Input
    • 903 POWER CORD, US & CANADA (120V)
    • R-51B-001-C 1 year Return-to-Agilent warranty
    • RMKT Agilent Refurbished Product (Do Not Use - Certiprime Option)
    • U7231A DDR3
    • U7232A Display Port & gt
    • U7233A DDR1

    Agilent DSO81204A datasheet & specifications

    REQUEST QUOTE
     
    What product are you interested in?
     *
    Your Name
    *
    Your Company
    *
    Email
    *
    Verify Email
    *
    Telephone
    Fax
    Country
    *
    State
    Address
    City
    Zipcode
    Referral
    Additional Comments