| FSH-B1 | 1145.5750.02 | Option:
Distance To Fault measurement for FSH3/6 ( model .13/.23/.26 only),
including 1 m cable (FSH-Z2 or |
| FSH-K1 | 1157.3458.02 | Remote
control (via RS-232) for FSH3/6 |
| FSH-K2 | 1157.3387.02 | Vector
reflection and transmission measurement for FSH3/6 (only model
.13/.23/.26) |
| FSH-K3 | 1157.3429.02 | Receiver
mode for FSH3/6 |
| FSH-Z1 | 1155.4505.02 | Average
power sensor for FSHx 10 MHz - 8 GHz, 200 pW - 200 mW |
| FSH-Z14 | 1120.6001.02 | Directional
power sensor 25 MHz - 1 GHz, 30 mW - 120(300)W N-female for FSHx |
| FSH-Z18 | 1165.1909.02 | Average
power sensor 10 MHz - 18 GHz, 200 pW - 200 mW for FSHx |
| FSH-Z2 | 1145.5767.02 | VSWR
bridge and power divider for FSH3/6 (model .13/.23/26 only) 10 MHz - 3
GHz, incl. FSH-Z29 |
| FSH-Z20 | 1145.5867.02 | Spare
N-cable to option DTF FSH-B1, 1 m, male/female N-connector up to 6 GHz |
| FSH-Z21 | 1304.5593.00 | 12V
car adapter. Connector for cigarette lighter (for FSH3/6/18) |
| FSH-Z22 | 1145.5880.02 | Serial/parallel
converter for printers with parallel interface for FSH3/6/18 |
| FSH-Z26 | 1300.7627.02 | Hard
case for FSH3/6/18 |
| FSH-Z28 | 1300.7804.02 | Spare
part load/short/open calibration standard for FSH3/6 DC to 6 GHz, N
connector |
| FSH-Z29 | 1300.7504.02 | Spare
load/open/short calibration standard for FSH3/6 N-connector |
| FSH-Z3 | 1300.7756.02 | VSWR
bridge wit DC BIAS and bypass switch. 10 MHz - 6 GHz for FSH3/6 (only
model .13/.23/.26) |
| FSH-Z30 | 1145.5773.02 | Spare
open/short standard for FSH-Z2, for calibration of VSWR measurement |
| FSH-Z31 | 1145.5780.02 | Spare
50 Ohm load standard for FSH-Z2, for calibration of VSWR and DTF
measurement |
| FSH-Z32 | 1145.5796.02 | Spare
battery pack for FSH |
| FSH-Z33 | 1145.5809.02 | Spare
power supply for FSH3/6/18 including mains plug for EU, GB and US |
| FSH-Z34 | 1145.5815.02 | Optical
RS232 interface cable 1.5 m for FSH3/6/18 (spare) |
| FSH-Z35 | 1145.5821.02 | CD-ROM
including FSH view software and manual for FSH3/6/18 (spare) |
| FSH-Z36 | 1145.5838.02 | Spare
headphones for FSH3/6/18, additional haedphones for |
| FSH-Z37 | 1300.7733.02 | Optical
USB interface cable, 1.5 m for FSH3/6/18 (spare) |
| FSH-Z44 | 1165.2305.02 | Directional
power sensor 200 MHz - 4 GHz, 30mW - 120(300) W for FSHx |
| HZ-15 | 1147.2736.02 | Probe
set for E and H nearfield emissions 30 MHz to 3 GHz |
| HZ-16 | 1147.2720.02 | Preamplifier
100 kHz to 3 GHz, 20 dB power supply 100 - 230 V for probe HZ-15 |
| RAZ | 0358.5714.02 | Matching
pad 50/75 Ohm, 0 - 2700 MHz, matching at one end, N-connectors |
| FSH626-C3 | 1145.5850.26.C3 | Three
years of depot calibration coverage based on the R&S recommended
calibration interval - includes test data. The first calibration is
included with product delivery with 2 additional depot calibration(s). |
| FSH626-C5 | 1145.5850.26.C5 | Five
years of calibration coverage based on the R&S recommended
calibration interval - includes test data. The first calibration is
included with product delivery with 4 additional depot calibration(s). |
| FSH626-R3 | 1145.5850.26.R3 | Three
years of depot repair coverage, including re-calibration if necessary to
complete the repair. First year of repair coverage is provided by the
12-month new product warranty |
| FSH626-R5 | 1145.5850.26.R5 | FIVE
YEARS OF DEPOT COVERAGE, INCLUDING RECALIBRATION AND TEST DATA IF
NECESSARY TO COMPLETE THE REPAIR. FIRST YEAR OF REPAIR COVERAGE IS
PROVIDED BY THE 12-MONTH NEW PRODUCT WARRANTY. |
| DCV-1 | 0240.2187.10 | Documentation
of calibration values |
| FSH-Z25 | 1145.5896.02 | Soft
carrying bag for FSH3/6/18 |
