Text For Info, USA Phones only
<- BACK


Refurbished Agilent E4445A


Agilent E4445A

Request Information
Refurbished
The Keysight E4445A PSA Series offers high-performance spectrum analysis, up to 13.2 GHz, with powerful one-button measurements, a versatile feature set, and a leading-edge combination of flexibility, speed, accuracy, and dynamic range. From millimeter wave and phase- noise measurements to spur searches and modulation analysis, the PSA Series offers unique and comprehensive high-performance solutions to R&D and manufacturing engineers in cellular and emerging wireless communications, aerospace, and defense.


Features:
  • +/-0.19 dB absolute amplitude accuracy
  • -155 dBm displayed average noise level (DANL)
  • -118 dBc/Hz phase noise at 10 kHz offset
  • 81 dB W-CDMA ACLR dynamic range
  • Standard 10 MHz analysis bandwidth
  • Optional 40 or 80 MHz analysis bandwidth to capture and measure complex signals. View demo
  • -78 dB (nominal) third order intermodulation for 40 or 80 MHz analysis bandwidth
  • Up to 300 MHz analysis bandwidth for calibrated VSA measurements
  • Flexible platform with 16 optional, easy-to-use built-in measurement personalities and hardware options
  • Agilent's PowerSuite one-button power measurements included as standard
  • MATLAB data analysis software for general purpose data analysis, visualization, and measurement automation. MATLAB software for PSA Series


    • Options:
  • 015 = 6 GHz return-loss Measurement Accessory Kit
  • 071 = Digital Demodulation H/W for S/N USUS4142/MY4140 Changed ot B7J on newer models
  • 107 = Audio input 100 kOhm
  • 110 = RF/uW internal preamplifier
  • 111 = USB device side I/O interface
  • 115 = 512 MB user memory
  • 117 = Secure memory erase
  • 119 = Noise Figure Hardware Kit .
  • 122 = 80 MHZ Bandwidth Digitizer
  • 123 = Switchable MW preselector bypass
  • 124 = Y-axis video output
  • 140 = 40 MHZ Bandwidth Digitizer
  • 1A7 = PSA Series ISO 17025 compliant calibration with test data
  • 1CM = Rackmount Kit
  • 1CN = Handle kit
  • 1CP = Rack mount kit with handles
  • 1CR = Rack slide kit
  • 1DS = RF internal preamplifier
  • 202 = GSM w/EDGE Measurement Personality
  • 204 = 1xEV-DO Measurement Personality
  • 210 = HSDPA/HSUPA measurement personality
  • 211 = TD-SCDMA Measurement Personality
  • 212 = TD-SCDMA Modulation Analysis Measurement Personality
  • 213 = HSPA/8PSK for TD-SCDMA Modulation Analysis Measurement Personality
  • 214 = 1xEV-DV Measurement Personality
  • 215 = External Source Control Measurement Personality
  • 217 = WLAN Measurement Personality
  • 219 = Noise figure measurement personality
  • 226 = Phase noise measurement personality
  • 230 = Benchlink web remote control software
  • 233 = Built-in measuring receiver personality
  • 235 = Wide BW digitizer external cal wizard
  • 239 = EMC measurement personality
  • 23A = AM/FM/PM triggering for measuring receiver
  • 23B = CCITT filter for audio measurements
  • 241 = Flexible digital modulation analysis
  • 266 = Programming code compatibility suite measurement personality
  • 423 = Switchable Microwave Preselector Bypass.
  • 426 = Gated Sweep Hardware
  • 514 = Rythm cable
  • 516 = 40 MHz BW IF output - low band
  • 517 = Boris DIF --with opt 122 or 124
  • 518 = Natasha DIF -- no opt 122 or 124
  • 520 = Preselector bias cable - no opt HNQ
  • 627 = Required for all options except HT1
  • 628 = Required for all options except 111
  • 630 = Required for option 110 without 123
  • 631 = Required for 123 without 110
  • 632 = Required for option 110 with 123
  • 633 = Required for all options except HS1, HS7 and HT1
  • ANE = 64 MB Flash Ram Memory
  • B78 = CDMA2000 Measurement Personality
  • B7J = Digital demodulation hardware
  • BAC = CDMAOne Measurement Personality
  • BAE = NADC,PDC Measurement Personality
  • BAF = W-CDMA Measurement Personality
  • H25 = 25 MHz IF Output
  • H26 = High Band Preamplifier (Discontiued), Replaced by option 110
  • H70 = 70 MHz IF Output
  • H7L = Auxiliary Wideband Log Video Output
  • HA5 = Modified Reduce Performance Capability (Japan, Korea, China)
  • HB2 = 21.4 MHz IF Output
  • HB6 = Prevent Unauthorized F/W upgrade
  • HBA = Rear Panel RF Input
  • HGT = Allows Gate width of less than 10 uSec
  • HN8 = Wideband Preselector Bypass (No Preselector)
  • HN9 = 80 MHz wide baseband IF output at 321.4 MHz for frequencies less than 3.05 GHz
  • HNQ = I/Q Front Panel Output connectors with hardware for use with 89600A
  • HS1 = Increase level of security write protects to user files
  • HS7 = Sercurity erase software
  • HT1 = GPS Interface Card for Trimble GPS
  • HY7 = Improved Gain 70 MHz IF Output
  • JMP = Rear panel jumper cable
    		•

    Agilent E4445A datasheet & specifications

    REQUEST QUOTE
     
    What product are you interested in?
     *
    Your Name
    *
    Your Company
    *
    Email
    *
    Verify Email
    *
    Telephone
    Fax
    Country
    *
    State
    Address
    City
    Zipcode
    Referral
    Additional Comments