New HIOKI 3281
Request Information
New
| The true RMS is shown in the distorted waveform -AC Current/Voltage, Frequencies, Resistance, Conduction check, Temperature (probe sold separately) -Wave peak value, Waveform distortion check -Auto-power off to prevent the power from being left on -Non-fuse type protects up to 600 V AC AC Current range -30.00 to 600 A AC, 3 ranges (+/-1 % rdg. +/-5 dgt. at 50 or 60Hz), Effective value rectifier Wave peak value at AC Current -30.0 to 600 A peak, 3 ranges (+/-3 % rdg. +/-5 dgt. at 50 or 60Hz) AC Voltage range -300.0 or 600 V AC, 2 ranges (+/-1 % rdg. +/-3 dgt. at 50 or 60Hz), Effective value rectifier Wave peak value at AC Voltage -up to 300 or 600 V peak, 2 ranges (+/-3 % rdg. +/-5 dgt. at 50 or 60Hz) Other functions -Distortion check: 1 to 5 Crest factor, Resistance: 1 k or 10 k-ohm range, Temperature: -50 to 150 degrees C (9462 TEMPERATURE PROBE required, sold separately), Frequency: 100 or 1000 Hz, Mode: Slow/Peak/C.F./RMS/Record mode/Auto-off/Conduction Analog output -None Frequency characteristics (at AC current / voltage) -40 to 1000 Hz Display section -Digital / 3000 dgt. Bar graph / 35 seg. Sampling rate -2 or 4 times/sec (Slow: 1 times/3 sec) Crest factor (RMS) -2.5 (1.7 at 600 A, 600 V range) Max. circuit voltage -600 V AC rms (insulated wire) Power supply -6F22(006P) × 1, Continuous use 45 hours Core jaw dia. -Ø 33 mm(1.30 in) Dimensions, mass -62 mm(2.44 in)W × 218 mm(8.58 in)H × 39 mm(1.54 in)D, 350 g (12.3 oz) Accessories -TEST LEAD 9207-10 (1), CARRYING CASE 9399 (1), Hand strap (1) |
HIOKI 3281 datasheet & specifications
