Text For Info, USA Phones only


New PIE 531 Loop Analyzer


PIE 531 Loop Analyzer

Request Information
New

POWERFULL BUT SMALL
PUT ONE IN EVERYONE’S TOOL BOX!

The Practical Instrument Electronics (PIE) Model 531 is designed to be a tool with all the practical functions required to get the job done easily without the confusing extras or reading through a complicated manual. The Model 531 can source and read current in the process loop and simulates, power and measure 2-wire transmitters. The PIE 531 fits in your pocket or you can clip it on your belt.

Use the EZ-Check™ switch to quickly switch between a set value, 4mA, and 20mA outputs. In read mode, the EZ-Check™ switch recalls minimum and maximum readings. Clear minimum and maximum memory values with a press of the EZ-Dial™ knob. There are two speeds for dialing in ranges. When you press down on the EZ-Dial™ it will select a faster dialing speed.

  • True +/- 0.05% of reading accuracy
  • Source and read 0.00 - 24.00mA
  • Simulate 2-wire transmitters 0.00 - 24.00mA
  • Power 2-wire transmitters and read 0.00 - 24.00mA
  • Display current in mA or -25.00 - 125.00% of 4-20mA
  • Full 4 digit display
  • Drive 1200Ω
  • User selectable 250Ω resistor in series with the output for compatibility with HART® protocol enabled devices
  • EZ-Dial™ knob easily adjust output by 0.01mA (0.01%) or 0.10mA (1.00%).
  • EZ-Check™ switch
  • User settable EZ-Check™ for 0% and 100% span adjustments
  • Uses 2 AA alkaline batteries.
  • Superior battery life of 45 hours under typical continuous usage
  • Easy access to battery compartment
  • Lightweight, Rugged and Reliable
  • Small, tough and protected to 60V

PIE 531 Loop Analyzer datasheet & specifications

REQUEST QUOTE
 
What product are you interested in?
 *
Your Name
*
Your Company
*
Email
*
Verify Email
*
Telephone
Fax
Country
*
State
Address
City
Zipcode
Referral
Additional Comments