ELECTROCORDER SL-3V-IP43-KIT

Mini voltage logger (3 Volts Channels)

The Electrocorder range is designed to allow electrical distribution companies to cost effectively monitor single and three phase supplies. Our products allow voltage problems to be highlighted quickly for further investigation using more sophisticated loggers.

Setting up the Electrocorder is easy, suitable for semi-technical staff. Using the supplied Windows software, Electrosoft; the location’s details are input to the unit’s memory and stored. Electrosoft will then print documentation allowing users to record and/or pass on delivery instructions to colleagues. All data is also stored in a database of dispatches and returns, which tracks the whereabouts of all units.

Why is the Electrocorder better than other similarly priced competitors? The Electrocorder range use a constant sampling technique, unlike the single reading of competitors. When the loggers start to record, they sample every channel 16 times per cycle, a cycle is 16ms at 60Hz and 20ms at 50Hz. At the end of each averaging period, 3 quantities are saved for each channel, the True RMS average, the Max, which is the highest cycle value during the period and the Min, lowest cycle value. This means that it will record all the peaks and troughs which are one cycle or longer.

When recording the Electrocorder will store the average voltage over the period chosen (1 sec to 60 min), it will also record the highest (max) & lowest min) cycle values during that period.

Freguency Range Options:
SL-3V-5H= 50Hz Frequency Range
SL-3V-6Z = 60Hz Frequency Range

Voltage Lead Options:
SL-3V-xx-USA = Bk, Rd, Be, We
SL-3V-xx-CAN = Rd, Bk, Be. We
SL-3V-xx-IEC = Bn, Bk, Gy, Be
SL-3V-xx-ANZ = Rd, We, Be, Bk

Electrocorder SL-3V-xx-xx-IP43-KIT inc. software, serial cable, four input leads & user guide.

ELECTROCORDER SL-3V-IP43-KIT datasheet & specifications